User Manual - J-Ultra Grinder
目次
User Instructions
Adjusting the grind setting
- The grinder is ready to use out of the box. Turn the adjustment dial ring counter-clockwise all the way to the starting point where the resistance starts and the crank handle can’t spin freely. The #0 will be aligned with the scale mark and the bottom edge of the adjustment dial ring will touch the first tier of the scale mark.
- The pyramid-shaped scale mark consists of multiple squares that indicate how many rotations you are at, and it gets smaller while you set coarser settings.
- There are five rotations in total. 100 clicks in a single rotation and each click moves the burr by 0.008mm/8 microns.
- Refer to the Grind Setting Reference chart below and turn the adjustment dial ring clockwise to dial in.
- Attach the rubber band to the grinder for a better grip.
- Put coffee beans in the hopper and turn the handle clockwise to start grinding.
- Follow the guide to calibrate the grinder after disassembling and reassembling the grinder.
Disassembly
Warning: Do not loosen the burr ring unit before step 3.
- Turn the adjustment dial ring clockwise by around two rotations and remove the knurled thumb nut counter-clockwise while pressing the burr.
- Remove the upper bearing cap および upper bearing.
- Remove the burr および central shaft, spring および lower bearing cap.
- Turn the burr ring unit forward (reverse threads). Disassembling the adjustment dial ring is not suggested.
- Do not clean the grinder with water. Cleaning with a brush and blower is recommended.
- Turn the burr ring unit backward (reverse threads) to the tightest position.
- Align the #0 with the scale mark and the bottom edge of the adjustment dial ring touches the first tier of the scale mark.
- Put the components back in the right sequence: lower bearing cap (the raised edge side facing upward), spring, shaft および burr.
- Put the upper bearing back from the top.
- While pressing the burr from the bottom, put the upper bearing cap back. The side with concave dots faces upward, and the U-shaped hole fits the shaft properly.
- Tighten the knurled thumb nut to calibrate the grinder while pressing the burr from the bottom.
Note: There are four and a half rotations in total counted from the starting point. The starting point might be different within ±10 clicks due to the strength you tighten the nut および dial.
Warning
Do not attempt to disassemble or remove the following components any further:
Video Tutorial
Warning: The handle will not be covered by warranty if any part is taken apart.
How to fold?
- Hold the crank part near the wooden knob and push it in.
- Turn the handle clockwise all the way to fold.
How to unfold?
- Hold the crank part near the wooden knob and push it in.
- Turn the handle counter-clockwise all the way to unfold.
Precautions
- Do not clean and wash the grinder with water.
- Do not wipe your grinder with solvents other than water and alcohol.
- Keep it in a dry environment in order to extend its lifetime.
- Follow the instructions of re-assembly, ensure to place the components into the correct positions.
- Keep the grinder away from children for safety concerns.
Read More >>
完璧なドリップコーヒーの究極ガイド！
Pour-over coffee is a manual brewing method that allows for a clean, flavorful cup, favored by enthusiasts for its control. The guide outlines necessary equipment, step-by-step instructions, and tips for optimal brewing, emphasizing the importance of water temperature, coffee grind consistency, and experimentation to enhance flavor.
5月 21, 2024
コメントはまだありません
コーヒー抽出の初心者ガイド
This guide introduces beginners to the art of coffee brewing, emphasizing the importance of understanding coffee beans, roast types, and essential equipment. It outlines the brewing process and popular methods, offering tips to enhance flavor, such as measuring ratios, grind consistency, and equipment maintenance. Ultimately, it encourages experimentation for optimal home-brewed coffee.
5月 21, 2024
コメントはまだありません
コメントを投稿するにはログインしてください。