Clean Tutorial for 1Zpresso Internal Adjustment Grinder
This tutorial is for Q2 JE JX grinder
Greetings, fellow coffer-lovers.
This tutorial allows you to learn how to clean a 1Zpresso internal adjustment grinder.
How often do you clean your 1Zpresso manual coffee grinder? Proper maintenance could prolong the lifetime of your grinder. We advise customers to dismantle the grinder once a month for cleaning and maintenance. The grinder could be dismantled without any tool.
Here is a reassembly tutorial for the internal adjustment mechanism of Q2 & JE & JX grinder. You also can find a cleaning and maintenance tutorial of the top adjustment and external adjustment from our blog.
Images below demonstrate the reassembly of JX grinder.
Table of Contents
Disassembly of Internal Adjustment Grinder
Use your non-dominant hand to grab the top of the grinder and use the dominant hand to remove the catch cup by turn counter-clockwise.
Turn adjustment counter-clockwise till adjustment dial fell off and remove the burr set. Take it out of the spring and the bearing cap..
Attaching the catch-cup to remove the outer burr ring by turning clockwise.
Note: the outer burr ring unable to remove without taking out the burr set.
Take out the pc lid by turn counter-clockwise throughout cleaning. Apply some strength to detach the wooden ball.
Clean it with the brush and be sure do not to apply water to wash it.
There is another design of the crank handle. It needs a 6mm hex key/Allen key to remove the pc lid by turning counter-clockwise.
Reassembly of Internal Adjustment Grinder
Put the wooden ball into the crank handle till you hear a click sound and tighten the pc lid by turn clockwise. Install the crank handle in the central shaft.
Turn the outer ring burr counter-clockwise to secure. Place the pieces in order to ensure the grinder works perfectly. The protruding side of the bearing cap consider facing upward, then the spring.
Followed by step 4.1 – Apply a 6mm hex key/Allen key to install the pc lid by turning clockwise till it tightens.
Install the burr set and the adjustment dial by turn clockwise to tighten the grinder till the crank handle unable to move dramatically.
And your 1Zpresso manual coffee grinder is ready to go.
Video tutorial - CC for English Subtitle
The tutorial shows how to disassemble and reassemble the grinder for cleaning. It is an internal adjustment version, it works on Q2, JE and JX grinders.
The tutorial shows how to disassemble and reassemble the grinder for cleaning. It is a top adjustment version, it works on JE-Plus and JX-Pro grinders.
The tutorial shows how to disassemble and reassemble the grinder for cleaning. It is an external adjustment version, it works on K-Pro, K-Plus, J-Max and K-Max grinders.